The hottest Wang Ruixiang's growth rate slows down

  • Detail

Wang Ruixiang: the growth rate slows down, and the transformation of the machinery industry is imminent.

Premier Wen Jiabao's government work report on March 5 proposed that the GDP growth rate in 2012 should be reduced to 7.5%. Compared with the light intensity reflected by the glass without film, this is the first time that the expected growth target of China's gross domestic product (GDP) is less than 8% in 8 years. It has surprised the world capital market, which is used to China's rapid economic growth. Asia Pacific stock markets closed lower, European and American stock markets fell at the opening, and international oil prices fell in response

Wang Ruixiang, deputy director of the proposal Committee of the CPPCC National Committee and President of the China Machinery Industry Federation, said in an exclusive interview on March 6 that this was a scientific decision made after the calm analysis of the Central Committee. 7.5% proposed that the positive side is greater, especially in terms of the industry. We should seize the development opportunities, appropriately control the growth rate of development, and focus on structural adjustment, mode transformation, transformation and upgrading, so as to truly embark on a quality and benefit based road, and rely on endogenous growth and innovation drive to promote the development of the machinery industry

7.5% positive factor

Wang Ruixiang said that 7.5% to slightly lower the growth target is to appropriately slow down the speed of economic growth, but pursue speed and total amount separately, and shift the economic growth mode that can greatly improve mechanical properties to focus on development quality and development efficiency. 7.5% still leaves room for structural adjustment, accelerating the transformation of development mode, transformation and upgrading of traditional industries and embarking on the industrialization road of scientific development to create a good market environment. Now we should slow down the growth rate and concentrate on solving the remaining problems in the past

Wang Ruixiang said that 7.5% was proposed after integrating various factors, which was practical and beneficial to the overall situation. Putting forward this goal is of great significance, which is to send a strong signal. We should face up to the difficulties and challenges we face now, see the challenges brought by the international and domestic economic environment, and accelerate the intensity and pace of structural adjustment and the transformation of development mode

7.5%, the impact on the industry is also some. The overall growth rate slows down, and the investment scale is bound to slow down. The structural adjustment of some industries will also be reflected in the market demand for equipment in terms of total amount control. The reduction of market demand has an impact on the development of equipment manufacturing industry. But on the whole, I think there are many positive factors. Wang Ruixiang said

Wang Ruixiang believes that China's economic development is still in a period of strategic opportunities, and China's traditional advantages still exist. The market prospect is also promising. Most importantly, the promotion of industrialization and urbanization has provided huge market demand for development. In addition, the industrial scale, manufacturing capacity and supporting products formed over the years in China have a certain competitiveness not only at home, but also internationally

according to the actual development of the machinery industry, although the growth rate fell to 7.5% in 2012, taking into account various factors, Wang Ruixiang judged that the annual industrial output value and main business income of the industry increased by about 1. The energy consumption was about 8% lower, the profit growth rate was about 12%, the growth rate of export earning foreign exchange was about 15%, and the goal of main business income and profit reaching about 7.5% should be achieved

facing the pressure of front resistance and back tracking

Wang Ruixiang felt very encouraged by the government work report, which mentioned many references to industrial restructuring, optimization and upgrading, especially the vigorous development of high-end equipment manufacturing industry

Wang Ruixiang said that developing high-end equipment manufacturing industry has become the national will. The machinery industry should follow the leading policy of stock upgrading and incremental high-end replacement, and focus on intelligence, cleanliness and safety to promote product structure adjustment. By accelerating the organic integration of emerging technologies and traditional industries, we will improve the technical level of key basic parts and basic equipment. Cultivate and develop a number of high-end equipment, promote independent innovation of major technical equipment, and increase the proportion of new product output value. Gradually form a high-end equipment manufacturing industry led by high-tech, which is at the high end of the value chain and the core link of the industrial chain, and can enhance the core competitiveness of the whole industry

but in Wang Ruixiang's view, at present, China has become a major country in the world machinery manufacturing industry, but China's international market, excluding the processing trade, can only rank fourth after the United States, Japan and Germany. The machinery industry has not yet formed a number of large enterprises and enterprise groups with large market share and international competitiveness, nor a large number of high-level specialized cooperative supporting plants. So far, there is no famous brand product in the machinery industry. Low industrial concentration, low degree of specialization and lack of brand products must be attached great importance to in the industry development strategy, and vigorously promote the transformation and upgrading of China's efforts to create a new biomaterial industry

at present, developed countries represented by the United States have implemented the Reindustrialization strategy, which poses a severe challenge to the prospect of upgrading the industry to the high end. The development of emerging industries around the world has entered a period of accelerated growth, and new breakthroughs are brewing in information networks, biology, renewable energy and other new technologies. The rapid development of high technologies such as artificial intelligence, robotics and digital manufacturing will rebuild the new competitive pattern of international manufacturing industry. The United States, the European Union, Japan and other developed economies have raised scientific and technological innovation and the development of emerging industries into national strategies. They have issued strategic plans to accelerate the development of emerging industries and implement Reindustrialization with advanced manufacturing as the core. They have stepped up their forward-looking layout in the field of emerging technologies, increased support through government subsidies and tax relief, and seized the commanding heights of future scientific and technological and industrial development

in addition, emerging economies and developing countries such as Brazil, India and Russia have also issued plans for the future development of science, technology and industry, accelerated the development of industries and technologies with comparative advantages, and achieved preferential policies to undertake the transfer of manufacturing industries from advanced developed countries, which has formed a pressure on China to catch up

if we lack due sensitivity and crisis awareness, respond improperly, delay the opportunity, and do not realize industrial upgrading as soon as possible, we will not be able to change the existing large but not strong passive situation, but also widen the gap between China and developed countries, and may fall behind some developing countries. Wang Ruixiang said

three transformations and three improvements

Wang Ruixiang particularly emphasized that the realization of transformation and upgrading is the key to breaking through the bottleneck and solving the crux of the machinery industry, and is the inevitable requirement for achieving leapfrog development

transformation is to change the mode of industrial development, from the development of complete machine driven parts to the development of both complete machine and parts; The transformation from mainly relying on physical production to relying on physical production and manufacturing services; The transformation from mainly relying on increasing the consumption of material resources and extensive management to mainly relying on scientific and technological progress, management innovation and improving the quality of workers (hereinafter referred to as the "three transformations"), and the transformation from traditional industries to innovative, green, low-carbon, intelligent manufacturing, service-oriented and domestic demand led industries, and take a new road to industrialization

upgrading is to comprehensively optimize the industrial structure, technical structure, product structure, organizational structure and process structure, and promote the overall optimization and upgrading of the industrial structure. Improve the industrial technology level, product quality and economic added value (hereinafter referred to as "three improvements") as soon as possible, and create a modern industrial system with optimized structure, advanced technology, cleanness and safety, high added value and strong core competitiveness. The whole industry should focus on the transformation and upgrading goals of "three transformations and three improvements", strive to achieve substantive results, and lay a solid foundation for building a powerful machinery manufacturing country

Wang Ruixiang finally said that it is urgent to accelerate the pace of transformation and upgrading, improve the development quality and level of the machinery industry as soon as possible, and realize the three transformations and three improvements as soon as possible

Copyright © 2011 JIN SHI